SYNERGY 3C FOR LANDROVER TD5

This is a special version of the Synergy 3 which is exclusively for use on the Landrover Defender & Discovery TD5 engine. It connects to the maf, map & fuel temp sensors to give a worthwhile boost in low and midrange torque.

It also includes limiters in the maf and map channels to prevent fuel cutting when the engine is tuned even more with a remap and/or vnt turbo.

Please choose the limiter type: Progressive for standard engines, brickwall for modified / remapped engines with typically, a larger or hybrid turbo.

The progressive limiter will allow the boost to increase 2-4psi depending on the setting and the brickwall limiter stops the ecu detecting an excessive maf and map signal completely so you will need to monitor the boost with a gauge - not via diagnostic tool as the reading will no longer be accurate - same for the maf signal unless the switch is off. On setting 9 is the signals are not modified just limited.

Remember, being based on a Synergy 2./3, it can be recabled and reprogrammed for common rail engines at a later date for £50

There is no dash switch option unless requested.